# 44 -24bitkHz vs 44.1kHz-16bit

**URL:** <https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420>\
**Category:** Music\
**Created:** [August 9, 2020, 3:49pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420 "2020-08-09T15:49:36Z")\
**Posts on this page:** 9\
**Page:** 2

<div class="post-metadata">

**Author:** ![Elk](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/elk/32/1240_2.png) [@Elk](https://forum.psaudio.com/u/Elk)\
**Post date:** [August 13, 2020, 7:16pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/21 "2020-08-13T19:16:48Z")

</div>

It can be, but I would expect the mastering to be performed by the same individual for 44.1/24 and 44.1/16. To get 44.1/16 all one need do is truncate and dither the 44.1/24 file.

---

<div class="post-metadata">

**Author:** ![tedsmith](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/tedsmith/32/96626_2.png) [@tedsmith](https://forum.psaudio.com/u/tedsmith)\
**Post date:** [August 13, 2020, 7:18pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/22 "2020-08-13T19:18:40Z")

</div>

Hopefully in the other order 🙂

---

<div class="post-metadata">

**Author:** ![Elk](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/elk/32/1240_2.png) [@Elk](https://forum.psaudio.com/u/Elk)\
**Post date:** [August 13, 2020, 7:27pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/23 "2020-08-13T19:27:54Z")

</div>

I hope I am rereading my response correctly. I think I have it correct - but my brain may be extra fuzzy today.

---

<div class="post-metadata">

**Author:** ![tedsmith](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/tedsmith/32/96626_2.png) [@tedsmith](https://forum.psaudio.com/u/tedsmith)\
**Post date:** [August 13, 2020, 7:46pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/24 "2020-08-13T19:46:30Z")

</div>

You need to dither before you truncate. My literal mindedness was just messing with the English language.

---

<div class="post-metadata">

**Author:** ![joma0711](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/joma0711/32/277666_2.png) [@joma0711](https://forum.psaudio.com/u/joma0711)\
**Post date:** [August 13, 2020, 8:17pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/25 "2020-08-13T20:17:43Z")

</div>

even at high speed, mag tape doesn’t have the same dynamic range at the top end (though it is a lot better than slow speed), also, not many punk bands were recorded at 30 ips 😉

---

<div class="post-metadata">

**Author:** ![Elk](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/elk/32/1240_2.png) [@Elk](https://forum.psaudio.com/u/Elk)\
**Post date:** [August 13, 2020, 8:27pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/26 "2020-08-13T20:27:33Z")

</div>

Roger! Literal is often helpful. 🙂

Here I was thinking I had the file formats reversed.

---

<div class="post-metadata">

**Author:** ![IanB52](https://avatars.discourse-cdn.com/v4/letter/i/f1d935/32.png) [@IanB52](https://forum.psaudio.com/u/IanB52)\
**Post date:** [August 13, 2020, 8:36pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/27 "2020-08-13T20:36:12Z")

</div>

This recording actually was 30ips. It might have been worse at 15ips (or better depending what you are going for). But in general, increases in track width actually gives more headroom than tape speed, for example going from 24 track 2" to 16 track 2" (more common in the 70s) and the very rare, but massive 8 track 2".

---

<div class="post-metadata">

**Author:** ![IanB52](https://avatars.discourse-cdn.com/v4/letter/i/f1d935/32.png) [@IanB52](https://forum.psaudio.com/u/IanB52)\
**Post date:** [August 13, 2020, 8:42pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/28 "2020-08-13T20:42:02Z")

</div>

Professionals have been doing these comparisons for 20 years or more. Every mastering engineer compares a 24 bit master to the 16 bit outputted version on a daily basis, often to evaluate different dither processes (which do sound different). I’ve lost track of how many times I’ve compared 24 bit and 16 bit audio from the same source. I’m willing to say that most of the reports of increased sound quality on consumer systems are totally valid and don’t need any further qualification.

Now there is always the possibility that some might not prefer 24 bit as 16 bit tends to sound perceptually, louder, more compressed, and less complex. And some DACs handle 16 bit very well where tonality is important but resolution less so.

---

<div class="post-metadata">

**Author:** ![tedsmith](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/tedsmith/32/96626_2.png) [@tedsmith](https://forum.psaudio.com/u/tedsmith)\
**Post date:** [August 13, 2020, 9:03pm UTC](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420/29 "2020-08-13T21:03:44Z")

</div>

> [@IanB52](#):
>
> Professionals have been doing these comparisons for 20 years or more.

In the late '80s tho we didn’t usually hear the difference with the audio equipment we had in engineering, we had plenty of customers who could hear the difference on their systems. They let us know when we accidentally dithered 24 bits down.

[Previous page](https://forum.psaudio.com/t/44-24bitkhz-vs-44-1khz-16bit/18420.md?page=1)
