# Bhk 300 high frequency hum in the monoblock

**URL:** <https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983>\
**Category:** Audio Components\
**Tags:** amp\
**Created:** [April 13, 2026, 7:50pm UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983 "2026-04-13T19:50:11Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![fauzigarib](https://avatars.discourse-cdn.com/v4/letter/f/e9a140/32.png) [@fauzigarib](https://forum.psaudio.com/u/fauzigarib)\
**Post date:** [April 13, 2026, 7:50pm UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983/1 "2026-04-13T19:50:11Z")

</div>

Hi there,

been getting a hum in one monoblock. At first I was being lazy thinking it may be a cable issue. All balanced connections.

Eventually got down to it and switched. All cables etc and the hum stayed with the right monoblock.

I have recently replaced he input tubes hoping that would eliminate it but it remains.

What else can I troubleshoot ?

Fauzi

---

<div class="post-metadata">

**Author:** ![Job\_Jalink](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@Job\_Jalink](https://forum.psaudio.com/u/Job_Jalink)\
**Post date:** [April 13, 2026, 8:54pm UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983/2 "2026-04-13T20:54:15Z")

</div>

Did you change tubes?

---

<div class="post-metadata">

**Author:** ![fauzigarib](https://avatars.discourse-cdn.com/v4/letter/f/e9a140/32.png) [@fauzigarib](https://forum.psaudio.com/u/fauzigarib)\
**Post date:** [April 13, 2026, 9:02pm UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983/3 "2026-04-13T21:02:29Z")

</div>

Yes I did. It’s still there.

I have narrowed it down to the particular monoblock.

These are just so cumbersome to send to the dealer who is in a different city.

Any other steps I can take to narrow it down further?

Fauzi

---

<div class="post-metadata">

**Author:** ![Job\_Jalink](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@Job\_Jalink](https://forum.psaudio.com/u/Job_Jalink)\
**Post date:** [April 14, 2026, 8:43pm UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983/4 "2026-04-14T20:43:47Z")

</div>

Perhaps try to record that hum and then to get an engineer on the phone at PSA to identify and discuss?

---

<div class="post-metadata">

**Author:** ![awayward](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/awayward/32/181898_2.png) [@awayward](https://forum.psaudio.com/u/awayward)\
**Post date:** [April 15, 2026, 12:53am UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983/5 "2026-04-15T00:53:42Z")

</div>

I’m sorry to be the bearer of bad news but I had to send one of my 300s to be repaired, it had the same symptom as yours, the good news is it was a very cheap part that was replaced, the main cost was the labour and freight, good luck!

---

<div class="post-metadata">

**Author:** ![fauzigarib](https://avatars.discourse-cdn.com/v4/letter/f/e9a140/32.png) [@fauzigarib](https://forum.psaudio.com/u/fauzigarib)\
**Post date:** [April 15, 2026, 5:05am UTC](https://forum.psaudio.com/t/bhk-300-high-frequency-hum-in-the-monoblock/43983/6 "2026-04-15T05:05:00Z")

</div>

Thanks! Yes will do. I am recoding it and sending to my dealer. Unfortunately in Pakistan the availability of parts is scarce, especially of older products. But he’s a good guy and will eventually take care of it.

Thank god the system is still running fine.
