# Burn in on SGCD display (after power outage reset timeout to auto) **URL:** \ **Category:** DACs\ **Tags:** support, dac\ **Created:** [September 8, 2020, 4:52am UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914 "2020-09-08T04:52:53Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![davidkellyphoto](https://avatars.discourse-cdn.com/v4/letter/d/97f17d/32.png) [@davidkellyphoto](https://forum.psaudio.com/u/davidkellyphoto)\ **Post date:** [September 8, 2020, 4:52am UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/1 "2020-09-08T04:52:53Z")
I’ve had amazing results with my SGCD over the last 2 year - and even recommended the auto-mute feature when the Vol is turned down to Zero. Sometime last month, we had a power surge/outage, and I had to reset some settings. One I didn’t realize changed was the Display Timeout - for the last month it is set to Auto, and I recently realized the Vol number are ALWAYS ON. Now I realize there is BURN IN from my typical Tv/Netflix listening levels. Attached are two pic of the burn in effect ![image](https://us1.discourse-cdn.com/flex015/uploads/psaudio/original/3X/c/e/cec9b273fbccf54ff7be6dbaee51a8eff8cc3408.jpeg) ![image](https://us1.discourse-cdn.com/flex015/uploads/psaudio/original/3X/3/2/32e20ca95aa25cbc5557cf180734f132fcb3217f.jpeg) Hopefully behind the 23 you can see the ghost of 16 or 18… Thoughts on the Auto Display Time-out never turning off the display, and the burn in I now have? SGCD -\> M700’s -\> Aerial Acoustics 7 B’s ---
**Author:** ![jamesh](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/jamesh/32/3871_2.png) [@jamesh](https://forum.psaudio.com/u/jamesh)\ **Post date:** [September 8, 2020, 4:22pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/2 "2020-09-08T16:22:26Z")
I can definitely see the ghost numbers. Give us a call and our guys can get a new display installed for you. Should be quick and painless. ---
**Author:** ![davidkellyphoto](https://avatars.discourse-cdn.com/v4/letter/d/97f17d/32.png) [@davidkellyphoto](https://forum.psaudio.com/u/davidkellyphoto)\ **Post date:** [September 8, 2020, 11:35pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/3 "2020-09-08T23:35:08Z")
Many thanks - I’ll call tomorrow. I may at the same time grab a Sprout - I need a 2nd system in the basement to drive some efficient Klipsch speakers! ---
**Author:** ![jamesh](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/jamesh/32/3871_2.png) [@jamesh](https://forum.psaudio.com/u/jamesh)\ **Post date:** [September 9, 2020, 3:19pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/4 "2020-09-09T15:19:46Z")
Sounds good David. Great, the Sprout100 will do great driving the Klipsch. ---
**Author:** ![stonefree1911](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/stonefree1911/32/92419_2.png) [@stonefree1911](https://forum.psaudio.com/u/stonefree1911)\ **Post date:** [September 9, 2020, 6:24pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/5 "2020-09-09T18:24:50Z")
I have a Sprout100 with Martin Logan 35XT’s as my 2nd system in my den (near field desktop). It is getting a LOT of use these days. It really makes me appreciate the sonic qualities of the little Sprout. Enjoy! ---
**Author:** ![davidkellyphoto](https://avatars.discourse-cdn.com/v4/letter/d/97f17d/32.png) [@davidkellyphoto](https://forum.psaudio.com/u/davidkellyphoto)\ **Post date:** [September 21, 2020, 4:20pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/6 "2020-09-21T16:20:00Z")
RMA authorized and the pre amp is sent! ---
**Author:** ![jamesh](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/jamesh/32/3871_2.png) [@jamesh](https://forum.psaudio.com/u/jamesh)\ **Post date:** [September 22, 2020, 2:41pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/7 "2020-09-22T14:41:28Z")
Awesome, thanks David. I saw that notice. ---
**Author:** ![davidkellyphoto](https://avatars.discourse-cdn.com/v4/letter/d/97f17d/32.png) [@davidkellyphoto](https://forum.psaudio.com/u/davidkellyphoto)\ **Post date:** [October 9, 2020, 4:33am UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/8 "2020-10-09T04:33:17Z")
I got it back, everything checkout out great! ---
**Author:** ![jamesh](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/jamesh/32/3871_2.png) [@jamesh](https://forum.psaudio.com/u/jamesh)\ **Post date:** [October 9, 2020, 3:43pm UTC](https://forum.psaudio.com/t/burn-in-on-sgcd-display-after-power-outage-reset-timeout-to-auto/18914/9 "2020-10-09T15:43:43Z")
Awesome! Thanks for keeping us posted.