# buzz sound in active speakers plugged on P10

**URL:** <https://forum.psaudio.com/t/buzz-sound-in-active-speakers-plugged-on-p10/4505>\
**Category:** Power Components\
**Created:** [November 24, 2017, 1:58pm UTC](https://forum.psaudio.com/t/buzz-sound-in-active-speakers-plugged-on-p10/4505 "2017-11-24T13:58:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![guyc](https://avatars.discourse-cdn.com/v4/letter/g/838e76/32.png) [@guyc](https://forum.psaudio.com/u/guyc)\
**Post date:** [November 24, 2017, 1:58pm UTC](https://forum.psaudio.com/t/buzz-sound-in-active-speakers-plugged-on-p10/4505/1 "2017-11-24T13:58:14Z")

</div>

Hello everybody,

I am using a P10 (European version) to power my equipment:

- Illusonic IAP4

- Genelec Home Audio active speakers

- Interconnect Cables GoldKabel XLR executive

- Power cables Golkabel executive ultra

the speakers are plugged on the high current socket (Zone E) and the Illusonic is plugged to a normal socket (Zone A)

Everything was sounding superb until a few days, I do have a buzz noise in the speakers. I tried by changing XLR and power cables, plugs, switching everything off and on and no success. I even exchange my Illusonic by a new one, still buzz noise…

I could stop the buzz noise by doing the following:

- solution 1: I changed my XLR cable by RCA, and then no buzz noise anymore

- solution 2: I kept my XLR cables but did not use the P10 and no buzz anymore.

I must say I am a bit puzzled… Does anyone have an idea on what could be the problem?

Thanks and regards

Guy (from France)