# Ethernet isolator

**URL:** <https://forum.psaudio.com/t/ethernet-isolator/6356>\
**Category:** Network Audio\
**Created:** [June 29, 2018, 3:39pm UTC](https://forum.psaudio.com/t/ethernet-isolator/6356 "2018-06-29T15:39:51Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![Veneet](https://avatars.discourse-cdn.com/v4/letter/v/77aa72/32.png) [@Veneet](https://forum.psaudio.com/u/Veneet)\
**Post date:** [December 23, 2018, 7:43am UTC](https://forum.psaudio.com/t/ethernet-isolator/6356/20 "2018-12-23T07:43:30Z")

</div>

@peterschwartzman,

I do use 2 of these. I followed the directions in this thread. See post 30 [EDIT] step 5 for dipswitch settings the version number of the FMC doesn’t seem to matter I have version 5 I think. Also, see post 8 regarding gigabit.

> [@Use of fiber optic to Ethernet converter with Bridge II](https://forum.psaudio.com/t/use-of-fiber-optic-to-ethernet-converter-with-bridge-ii/3586/30):
>
> Hi All, I did have an issue with my DAC & it was replaced as it was a suspected broken bridge 11 board. The new DAC synched with ROON straight away & works well. The only issue I have now is I just can’t get the dam TP-Link MC110CS media converters to work. I’ve done the following to double check everything: Confirmed both box’s are MC110cs Version 4 Both show the same x2 greed LED lights, i.e. power & LFP (no other LED light up or blink suggesting data transfer) Double checked optical pat…

You could use an ethernet switch between your FMCs and the bridge and it would solve the mismatch of speeds if you wanted to keep your FMCs.

I use Roon to control my music, but Mcontrol works too.

I am not sure about the Force and Auto settings. I did this about a year ago or more.

If post 30 doesn’t help I can crack open the aluminum box that I mounted my FMCs in and see the settings, its a bit of a pain to reach it, but I am happy to help.

---

_[View the full topic](https://forum.psaudio.com/t/ethernet-isolator/6356)._
