# How to open P10

**URL:** <https://forum.psaudio.com/t/how-to-open-p10/20647>\
**Category:** Power Components\
**Created:** [December 16, 2020, 9:45am UTC](https://forum.psaudio.com/t/how-to-open-p10/20647 "2020-12-16T09:45:27Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![amati](https://avatars.discourse-cdn.com/v4/letter/a/73ab20/32.png) [@amati](https://forum.psaudio.com/u/amati)\
**Post date:** [December 16, 2020, 9:45am UTC](https://forum.psaudio.com/t/how-to-open-p10/20647/1 "2020-12-16T09:45:27Z")

</div>

Hi,

I want to change the AC Inlet in a Furutech NCF. The question is, how to open the P10 ?

Peter

---

<div class="post-metadata">

**Author:** ![watchdog507](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/watchdog507/32/7301_2.png) [@watchdog507](https://forum.psaudio.com/u/watchdog507)\
**Post date:** [December 16, 2020, 1:45pm UTC](https://forum.psaudio.com/t/how-to-open-p10/20647/2 "2020-12-16T13:45:18Z")

</div>

On the bottom there should be 4 black screws

These need to be removed flip it over and lift off lid

I use a glass fitters suction device to safely lift it

---

<div class="post-metadata">

**Author:** ![jamesh](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/jamesh/32/3871_2.png) [@jamesh](https://forum.psaudio.com/u/jamesh)\
**Post date:** [December 16, 2020, 4:06pm UTC](https://forum.psaudio.com/t/how-to-open-p10/20647/3 "2020-12-16T16:06:00Z")

</div>

I just sent you an email with some instructions.

---

<div class="post-metadata">

**Author:** ![amati](https://avatars.discourse-cdn.com/v4/letter/a/73ab20/32.png) [@amati](https://forum.psaudio.com/u/amati)\
**Post date:** [December 17, 2020, 3:36pm UTC](https://forum.psaudio.com/t/how-to-open-p10/20647/4 "2020-12-17T15:36:56Z")

</div>

Dear music listeners,

Thank you very much for the quick and competent help, I wouldn’t have thought of that. The screws are cleverly hidden.

I wish everyone a corona free Christmas

Peter

---

<div class="post-metadata">

**Author:** ![amati](https://avatars.discourse-cdn.com/v4/letter/a/73ab20/32.png) [@amati](https://forum.psaudio.com/u/amati)\
**Post date:** [December 22, 2020, 6:02am UTC](https://forum.psaudio.com/t/how-to-open-p10/20647/5 "2020-12-22T06:02:53Z")

</div>

Dear James,  
last weekend I tried to open the P10. Unfortunately, despite the instructions, I have reached my limits because the instructions are for loosening the front panel. I want to loosen the back panel to replace the AC inlet. There are so many screws on the underside of the P10 that I don’t dare to loosen them, otherwise something might fall inwards. Do you have instructions on how to remove the back panel?  
What about the Schuko sockets in the back panel. I don’t think the quality is particularly good because all my Schuko plugs are very loose. Is it possible to change them? For example Furutech sockets?

Best Wishes

Peter

---

<div class="post-metadata">

**Author:** ![nikolay](https://avatars.discourse-cdn.com/v4/letter/n/a698b9/32.png) [@nikolay](https://forum.psaudio.com/u/nikolay)\
**Post date:** [December 24, 2020, 2:29pm UTC](https://forum.psaudio.com/t/how-to-open-p10/20647/6 "2020-12-24T14:29:00Z")

</div>

Perhaps obvious - but be very careful not to kill yourself! There may be capacitors inside that can retain current even after you unplug the Px from the wall!
