# P20 limitations? Empirical data please

**URL:** <https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035>\
**Category:** Power Components\
**Created:** [November 17, 2021, 3:56pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035 "2021-11-17T15:56:07Z")\
**Posts on this page:** 13\
**Page:** 3

<div class="post-metadata">

**Author:** ![RonP](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/ronp/32/213555_2.png) [@RonP](https://forum.psaudio.com/u/RonP)\
**Post date:** [November 20, 2021, 3:35pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/42 "2021-11-20T15:35:56Z")

</div>

What hums? The amp or the P20?

---

<div class="post-metadata">

**Author:** ![Vmax](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/vmax/32/19896_2.png) [@Vmax](https://forum.psaudio.com/u/Vmax)\
**Post date:** [November 20, 2021, 4:03pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/43 "2021-11-20T16:03:36Z")

</div>

I would try plugging them to the same high current Duplex top and Bottom not side by side. You obviously have a ground potential difference between duplex outlets creating the hum.

Perhaps one of the high current duplexes was tightened differently regarding green screw torque or its ground pigtail lost multistrand conductors due to poor wire stripping at the factory. Definitely a ground potential issue using same duplex right or left may cure. It is worth a shot.

 ![image](https://us1.discourse-cdn.com/flex015/uploads/psaudio/original/3X/c/4/c4b27d4ca145586a0a5f23bca9d150164e6525f3.jpeg)

---

<div class="post-metadata">

**Author:** ![Vmax](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/vmax/32/19896_2.png) [@Vmax](https://forum.psaudio.com/u/Vmax)\
**Post date:** [November 20, 2021, 4:12pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/44 "2021-11-20T16:12:44Z")

</div>

The other possibility is your two power cords are not matching in ground impedance. I would try two other brands something like two of same Shunyatas The two separate wall outlets if dedicated lines with separate grounds would mask such hum as might using one outlet top and bottom od duplex at the wall.

If the same duplex or different cords don’t cure it there is a ground potential difference in the gryphon.

You would then likely need another P20 hooked to a separate line to address that or use the wall. If both amp power cords are plugged in same wall duplex and different matching power cords don’t resolve it. Then it is an amp issue with internal ground planes.

---

<div class="post-metadata">

**Author:** ![dchang05](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/dchang05/32/294697_2.png) [@dchang05](https://forum.psaudio.com/u/dchang05)\
**Post date:** [November 20, 2021, 4:48pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/45 "2021-11-20T16:48:03Z")

</div>

I don’t know, it could be those darn Stealth Dream power cords that confuse the P20. It’s time to upgrade them to something better. Wait, I think Al has reached the end of road for the power cords at least this year 🤔.

---

<div class="post-metadata">

**Author:** ![davida](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/davida/32/94292_2.png) [@davida](https://forum.psaudio.com/u/davida)\
**Post date:** [November 20, 2021, 5:06pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/46 "2021-11-20T17:06:55Z")

</div>

Hey Al time to dump those high priced power cables…/.  
and get yourself a pair of Pangea AC9SE MkIIs one for P20 to wall  
and a second from P20 to your amp…

My P15 and JC5 love them…not all great gear is uber priced stuff…

Give them a try Jay Victor stuff is quite good…so much so don’t feel the  
need to look elsewhere…

Best wishes Al

---

<div class="post-metadata">

**Author:** ![Vmax](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/vmax/32/19896_2.png) [@Vmax](https://forum.psaudio.com/u/Vmax)\
**Post date:** [November 20, 2021, 5:28pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/47 "2021-11-20T17:28:43Z")

</div>

> [@Vmax](#):
>
> You would then likely need another [P20](https://www.psaudio.com/products/directstream-p20-power-plant/) hooked to a separate line to address that or use the wall. If both amp power cords are plugged in same wall duplex and different matching power cords don’t resolve it. Then it is an amp issue with internal ground planes.

Better yet an excuse for monoblocks or new MBLs since Christmas is nearing.

---

<div class="post-metadata">

**Author:** ![lonson](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/lonson/32/249792_2.png) [@lonson](https://forum.psaudio.com/u/lonson)\
**Post date:** [November 20, 2021, 8:39pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/48 "2021-11-20T20:39:26Z")

</div>

Whenever I hear a hum in the stereo I just pretend Keith, or Erroll, or Oscar or Thelonious is along for the performance.

---

<div class="post-metadata">

**Author:** ![RonP](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/ronp/32/213555_2.png) [@RonP](https://forum.psaudio.com/u/RonP)\
**Post date:** [November 20, 2021, 8:41pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/49 "2021-11-20T20:41:42Z")

</div>

I never have a hum in the stereo but when i’m not listening, I hear these guys anyway.

---

<div class="post-metadata">

**Author:** ![aangen](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/aangen/32/295709_2.png) [@aangen](https://forum.psaudio.com/u/aangen)\
**Post date:** [November 20, 2021, 9:14pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/50 "2021-11-20T21:14:42Z")

</div>

I had them plugged into the same high current outlet, top to bottom. It’s not my first day with this gear.

I had the amp plugged into the P20 without hum. But then I moved all the gear to a new location and the P20 hums with the amp connected to it.

No big deal. I’m not interested in any more messing around with it. It’s fine.

---

<div class="post-metadata">

**Author:** ![Vmax](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/vmax/32/19896_2.png) [@Vmax](https://forum.psaudio.com/u/Vmax)\
**Post date:** [November 20, 2021, 10:25pm UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/51 "2021-11-20T22:25:14Z")

</div>

@aangen I would try the P20 into the Duplex the amps like. Then Amps into the P20. Likely loose ground and duplex or in your main service panel wiring. Or if it is not dedicated line some junction box where grounds are shared. That stuff loosens up over time . I had similar monoblock issues before i did new dedicated lines. I was putting seven to eight turns on some connections. Three turns was the norm ging through every main panr connection even the primary main panel bus bars

---

<div class="post-metadata">

**Author:** ![aangen](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/aangen/32/295709_2.png) [@aangen](https://forum.psaudio.com/u/aangen)\
**Post date:** [November 21, 2021, 12:17am UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/52 "2021-11-21T00:17:01Z")

</div>

I have five dedicated 20 amp circuits in the location where my system now lives. I think that should suffice. The gains I am hoping to achieve by plugging the amp into the P20 are not worth any more discussion. I’m out.

---

<div class="post-metadata">

**Author:** ![RonP](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/ronp/32/213555_2.png) [@RonP](https://forum.psaudio.com/u/RonP)\
**Post date:** [November 21, 2021, 12:25am UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/53 "2021-11-21T00:25:28Z")

</div>

horse dead now.

---

<div class="post-metadata">

**Author:** ![Vmax](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/vmax/32/19896_2.png) [@Vmax](https://forum.psaudio.com/u/Vmax)\
**Post date:** [November 23, 2021, 5:42am UTC](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035/54 "2021-11-23T05:42:31Z")

</div>

Well according to this it takes the right caliber. [Database Record Viewer | Horse Side Vet Guide](https://horsesidevetguide.com/drv/Skill/205/euthanize-a-horse-in-an-emergency-with-gun/) Perhaps Elk can come in and dress the horse like a 🦌.

[Previous page](https://forum.psaudio.com/t/p20-limitations-empirical-data-please/26035.md?page=2)
