# P3 Internal Webpage

**URL:** <https://forum.psaudio.com/t/p3-internal-webpage/1769>\
**Category:** Humor\
**Created:** [December 9, 2014, 7:16pm UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769 "2014-12-09T19:16:26Z")\
**Posts on this page:** 13\
**Page:** 1

<div class="post-metadata">

**Author:** ![halcroman](https://avatars.discourse-cdn.com/v4/letter/h/f4b2a3/32.png) [@halcroman](https://forum.psaudio.com/u/halcroman)\
**Post date:** [December 9, 2014, 7:16pm UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/1 "2014-12-09T19:16:26Z")

</div>

Hi,  
I’ve just hooked up my P3 with a wireless ethernet bridge and the blue light on the P3 display panel blinks on and off and when I type [http://powerplant](http://powerplant) into my computer as the instructions say…I get the message “Safari can’t open the page”?!  
When I go to my Command Center on the PS Audio Website I get information about voltage in and voltage out and THD in and THD out…?  
What is going on…and what should I do…?

---

<div class="post-metadata">

**Author:** ![dennis](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dennis](https://forum.psaudio.com/u/dennis)\
**Post date:** [December 10, 2014, 6:19am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/2 "2014-12-10T06:19:20Z")

</div>

On the ps Audio Web page the is a line labeled “ **LAN IP address** ”, type that address into your browser and it should get you there. Safari has issues with the hostname lookup.

Dennis

---

<div class="post-metadata">

**Author:** ![halcroman](https://avatars.discourse-cdn.com/v4/letter/h/f4b2a3/32.png) [@halcroman](https://forum.psaudio.com/u/halcroman)\
**Post date:** [December 10, 2014, 3:24pm UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/3 "2014-12-10T15:24:56Z")

</div>

Hi Dennis,

I must be challenged…

I’ve looked at every page of the PS Audio Site and can’t seem to find "LAN IP address anywhere…? Exactly where should I be looking?

I just found the IP address…192.168.0.11 but when I typed it into my browser I get:-

“Safari Can’t Open the Page because the Server where this page is located isn’t responding”

Regards

Henry

---

<div class="post-metadata">

**Author:** ![dennis](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dennis](https://forum.psaudio.com/u/dennis)\
**Post date:** [December 11, 2014, 3:39am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/4 "2014-12-11T03:39:41Z")

</div>

I’m sorry. That must be a page availible only to PSAudio. Can you tell me your UnitId? and IU will get you your local IP address.

Dennis

---

<div class="post-metadata">

**Author:** ![halcroman](https://avatars.discourse-cdn.com/v4/letter/h/f4b2a3/32.png) [@halcroman](https://forum.psaudio.com/u/halcroman)\
**Post date:** [December 11, 2014, 4:33am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/5 "2014-12-11T04:33:56Z")

</div>

My Unit ID is 096127

Serial No. P3-AO-36096127

Henry

---

<div class="post-metadata">

**Author:** ![dennis](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dennis](https://forum.psaudio.com/u/dennis)\
**Post date:** [December 11, 2014, 4:46am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/6 "2014-12-11T04:46:31Z")

</div>

**LAN IP address:** 192.168.0.11

Dennis

---

<div class="post-metadata">

**Author:** ![stevem2](https://avatars.discourse-cdn.com/v4/letter/s/cab0a1/32.png) [@stevem2](https://forum.psaudio.com/u/stevem2)\
**Post date:** [December 11, 2014, 7:07am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/7 "2014-12-11T07:07:55Z")

</div>

Dennis,

He tried that IP address. My address is the same (as seen on the My Devices/Control PSA page and verified with fing). I get the same result with Safari and Firefox (both on my MacBook Pro). Safari has no problems displaying the Bridge page.

---

<div class="post-metadata">

**Author:** ![dennis](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dennis](https://forum.psaudio.com/u/dennis)\
**Post date:** [December 11, 2014, 7:42am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/8 "2014-12-11T07:42:20Z")

</div>

It looks like there is some issue with your P3. TRy power cycling and check the IP addres again.

Dennis

---

<div class="post-metadata">

**Author:** ![halcroman](https://avatars.discourse-cdn.com/v4/letter/h/f4b2a3/32.png) [@halcroman](https://forum.psaudio.com/u/halcroman)\
**Post date:** [December 11, 2014, 3:29pm UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/9 "2014-12-11T15:29:07Z")

</div>

Dennis,

If there is something wrong with my P3…why can I see all the information in the Command Centre under ‘Control’ in ‘My PS’…?

When you say “try power cycling”…do you mean turn the unit on and off?..because I’ve done that…!

Now when I put the LAN IP address in (on both Safari and Firefox)…I get info that the address should be 192.168.0.1 and that leads me to my Router Webpage?

What am I supposed to do with that…?

Henry

---

<div class="post-metadata">

**Author:** ![dennis](https://avatars.discourse-cdn.com/v4/letter/d/e56c9b/32.png) [@dennis](https://forum.psaudio.com/u/dennis)\
**Post date:** [December 12, 2014, 3:51am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/10 "2014-12-12T03:51:58Z")

</div>

I sounds like the P3 web interface is corrupt or something else is wrong. There is a seperate interface that talks to our wed site.

Dennis

---

<div class="post-metadata">

**Author:** ![Brodric](https://avatars.discourse-cdn.com/v4/letter/b/c68b51/32.png) [@Brodric](https://forum.psaudio.com/u/Brodric)\
**Post date:** [December 12, 2014, 5:43am UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/11 "2014-12-12T05:43:38Z")

</div>

> **halcroman said** Hi, .... What is going on....and what should I do..?

Your P3 is calling home and you can access it from the WAN side: can I ask why you particularly need to access the P3 web UI from the LAN side? Assuming the configuration computer is on the same subnet as the P3, just enter the LAN IP being reported in the powerplay in the browser and it will access the internal web pages. So the LAN IP that Dennis gave you does not work? What is the LAN IP of the configuration computer?

---

<div class="post-metadata">

**Author:** ![halcroman](https://avatars.discourse-cdn.com/v4/letter/h/f4b2a3/32.png) [@halcroman](https://forum.psaudio.com/u/halcroman)\
**Post date:** [December 12, 2014, 7:39pm UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/12 "2014-12-12T19:39:42Z")

</div>

If the P3 is registered, connected to the PS Audio web site and giving me all the ‘real time’ information I need…I don’t need to connect via the LAN IP at all…as far as I can tell?

Thanks for all your help…

---

<div class="post-metadata">

**Author:** ![Brodric](https://avatars.discourse-cdn.com/v4/letter/b/c68b51/32.png) [@Brodric](https://forum.psaudio.com/u/Brodric)\
**Post date:** [December 12, 2014, 8:45pm UTC](https://forum.psaudio.com/t/p3-internal-webpage/1769/13 "2014-12-12T20:45:40Z")

</div>

> **halcroman said** If the P3 is registered, connected to the PS Audio web site and giving me all the 'real time' information I need.....

Not all information, but most. You'll find there are random hourly gaps in the power play performance data. And once we arrive at Jan 1, 2015 all the 2014 performance data is dumped from the server (or it used to be, see what happens).

p.s. I like your forum moniker @halcroman!
