# Premier Regenerator

**URL:** <https://forum.psaudio.com/t/premier-regenerator/2211>\
**Category:** Power Components\
**Created:** [May 22, 2015, 5:59am UTC](https://forum.psaudio.com/t/premier-regenerator/2211 "2015-05-22T05:59:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![willco](https://avatars.discourse-cdn.com/v4/letter/w/94ad74/32.png) [@willco](https://forum.psaudio.com/u/willco)\
**Post date:** [May 22, 2015, 5:59am UTC](https://forum.psaudio.com/t/premier-regenerator/2211/1 "2015-05-22T05:59:50Z")

</div>

Just hooked up the premier regen. I see that the input and output THD are almost exactly the same: usually 2.0 input and 2.1 output. Is this typical?

---

<div class="post-metadata">

**Author:** ![lonson](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/lonson/32/249792_2.png) [@lonson](https://forum.psaudio.com/u/lonson)\
**Post date:** [May 22, 2015, 7:47am UTC](https://forum.psaudio.com/t/premier-regenerator/2211/2 "2015-05-22T07:47:12Z")

</div>

Hell no. You should have about five or six times less output than that. . . . I’d call PS Audio support.

---

<div class="post-metadata">

**Author:** ![willco](https://avatars.discourse-cdn.com/v4/letter/w/94ad74/32.png) [@willco](https://forum.psaudio.com/u/willco)\
**Post date:** [May 22, 2015, 10:09am UTC](https://forum.psaudio.com/t/premier-regenerator/2211/3 "2015-05-22T10:09:09Z")

</div>

Yes, that’s what PS told me also.

I’m wondering what a typical repair bill might be for this.

It also occurs to me that if the unit didn’t have the handy THD readout on the lcd, that I

wouldn’t even know anything was amiss. I would have just assumed that regens don’t

produce audible results, or possible, through placebo, might have **imagined** better audio!