# PS Audio Statement Speaker Cable Connectors

**URL:** https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159
**Category:** Cables
**Created:** [December 4, 2024, 7:28pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159 "2024-12-04T19:28:22Z")
**Posts on this page:** 11
**Page:** 1

<div class="post-metadata">

### Author: ![mabrow](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@mabrow](https://forum.psaudio.com/u/mabrow)
#### Post date: [December 4, 2024, 7:28pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/1 "2024-12-04T19:28:22Z")

</div>

Hello,

1st time posting. I have a pair of Statement cables with broken banana screw in connectors. How did they break? I won’t mention names (kids) but I am looking for 4 replacements. The screw in spade connectors would work as well.

I contacted PS and they no longer have these parts. I have looked high and low on the internet with zero results.

Hoping someone might have spare connectors or know of a good source to purchase these.

Thanks much!

---

<div class="post-metadata">

### Author: ![dawkinsj](https://avatars.discourse-cdn.com/v4/letter/d/a5b964/32.png) [@dawkinsj](https://forum.psaudio.com/u/dawkinsj)
#### Post date: [December 5, 2024, 2:24am UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/2 "2024-12-05T02:24:33Z")

</div>

You might want to find out the thread size for the screw in connectors from PSA and then check with Wireworld and see if theirs will fit. Also Wywires and several other companies use a similar type.

---

<div class="post-metadata">

### Author: ![mabrow](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@mabrow](https://forum.psaudio.com/u/mabrow)
#### Post date: [December 5, 2024, 12:53pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/3 "2024-12-05T12:53:24Z")

</div>

Thank you. I know thread size is 5mm and will see if these companies have something compatible.

---

<div class="post-metadata">

### Author: ![aangen](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/aangen/32/295709_2.png) [@aangen](https://forum.psaudio.com/u/aangen)
#### Post date: [December 5, 2024, 1:17pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/4 "2024-12-05T13:17:15Z")

</div>

> **[Amazon.com: Monoprice 109437 5PRJX74047 Gold Plated Speaker Banana Plugs – 5...](https://www.amazon.com/Monoprice-5PRJX74047-Plated-Speaker-Banana/dp/B0097JLRFM)**
>
> Enhance your audio experience with the Monoprice 5 Pairs of High-Quality Gold Plated Speaker Banana Plugs, Open Screw Type. These speaker connectors offer seamless connectivity, ensuring your sound system operates at its best. Versatility is at the...

---

<div class="post-metadata">

### Author: ![mabrow](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@mabrow](https://forum.psaudio.com/u/mabrow)
#### Post date: [December 5, 2024, 1:42pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/5 "2024-12-05T13:42:25Z")

</div>

Thanks. I’ve seen those and so many other products like those. If I can’t find the connectors that thread right on, I will go with something like the Monoprice, Nakamichi etc.

---

<div class="post-metadata">

### Author: ![aangen](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/aangen/32/295709_2.png) [@aangen](https://forum.psaudio.com/u/aangen)
#### Post date: [December 5, 2024, 1:49pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/6 "2024-12-05T13:49:26Z")

</div>

I looked for 45 minutes for a banana with a 5mm thread. No luck. It should be available should it not? Doh!

---

<div class="post-metadata">

### Author: ![mabrow](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@mabrow](https://forum.psaudio.com/u/mabrow)
#### Post date: [December 5, 2024, 2:02pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/7 "2024-12-05T14:02:26Z")

</div>

Wish I had only looked for 45 minutes, but it was several hours plus calling companies like Mouser, Digi-Key and others.

5mm thread bananas or spades seems simple enough to find…Not!

---

<div class="post-metadata">

### Author: ![BobBJC](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/bobbjc/32/258405_2.png) [@BobBJC](https://forum.psaudio.com/u/BobBJC)
#### Post date: [December 14, 2024, 11:23pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/8 "2024-12-14T23:23:48Z")

</div>

Most screw on speaker connections are problematic designs and will probably not stay tight over time. Even with a liberal dose of the blue or red Loctite! They do a little better with the larger AWG conductors (10/12 AWG) than the smaller gauge. A properly done solder or crimp is a better option.

---

<div class="post-metadata">

### Author: ![jimmywho](https://avatars.discourse-cdn.com/v4/letter/j/bbe5ce/32.png) [@jimmywho](https://forum.psaudio.com/u/jimmywho)
#### Post date: [December 15, 2024, 4:22am UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/9 "2024-12-15T04:22:44Z")

</div>

I have some ps audio screw on spades, dm me.

---

<div class="post-metadata">

### Author: ![mabrow](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@mabrow](https://forum.psaudio.com/u/mabrow)
#### Post date: [December 15, 2024, 12:44pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/10 "2024-12-15T12:44:20Z")

</div>

Food for thought. Thanks.

---

<div class="post-metadata">

### Author: ![mabrow](https://avatars.discourse-cdn.com/v4/letter/m/f07891/32.png) [@mabrow](https://forum.psaudio.com/u/mabrow)
#### Post date: [December 15, 2024, 12:52pm UTC](https://forum.psaudio.com/t/ps-audio-statement-speaker-cable-connectors/40159/11 "2024-12-15T12:52:23Z")

</div>

Excellent! I would sure like to get those screw on spades from you. I don’t know if this is a direct message. I just recently joined and don’t know all the ins and outs of this forum.
