# Remote Control Interfering with P5 Regenerator

**URL:** <https://forum.psaudio.com/t/remote-control-interfering-with-p5-regenerator/5198>\
**Category:** Power Components\
**Created:** [February 24, 2018, 10:43pm UTC](https://forum.psaudio.com/t/remote-control-interfering-with-p5-regenerator/5198 "2018-02-24T22:43:15Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bwegner1](https://avatars.discourse-cdn.com/v4/letter/b/48db29/32.png) [@bwegner1](https://forum.psaudio.com/u/bwegner1)\
**Post date:** [February 24, 2018, 10:43pm UTC](https://forum.psaudio.com/t/remote-control-interfering-with-p5-regenerator/5198/1 "2018-02-24T22:43:15Z")

</div>

I have two P5 regenerators (purchased in 2014 and 2016). My Comcast Xfinity X1 remote control turns off my P5’s whenever I use the volume control (both up and down). Any suggestions?

---

<div class="post-metadata">

**Author:** ![Elk](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/elk/32/1240_2.png) [@Elk](https://forum.psaudio.com/u/Elk)\
**Post date:** [February 24, 2018, 11:02pm UTC](https://forum.psaudio.com/t/remote-control-interfering-with-p5-regenerator/5198/2 "2018-02-24T23:02:28Z")

</div>

I rarely use the remote for my PowerPlants, turning them on manually. Thus, I would cover the sensor windows.

If you do not control them manually, you can use an Internet connection for control and similarly cover the sensor windows.

---

<div class="post-metadata">

**Author:** ![krelldog](https://avatars.discourse-cdn.com/v4/letter/k/838e76/32.png) [@krelldog](https://forum.psaudio.com/u/krelldog)\
**Post date:** [March 20, 2018, 12:20am UTC](https://forum.psaudio.com/t/remote-control-interfering-with-p5-regenerator/5198/3 "2018-03-20T00:20:22Z")

</div>

My Dish Network remote-volume up and down (for my LG TV) button powers my P-10 off.

Amazingly…My LG remote (for the same TV) doesn’t affect it.

Its my only negative so far for my P-10.
