# Stupid Question I'm Sure - Why do the BHK 300 Have 2 Speaker Outputs?

**URL:** https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309
**Category:** Amplifiers
**Created:** [September 2, 2017, 10:26am UTC](https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309 "2017-09-02T10:26:09Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![dschamis](https://avatars.discourse-cdn.com/v4/letter/d/6a8cbe/32.png) [@dschamis](https://forum.psaudio.com/u/dschamis)
#### Post date: [September 2, 2017, 10:26am UTC](https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309/1 "2017-09-02T10:26:09Z")

</div>

There’s either a really cool reason for this that I’m not thinking about or I’m being dumb here - I’ll sure I’ll find out soon enough which one.

David

---

<div class="post-metadata">

### Author: ![st50maint](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@st50maint](https://forum.psaudio.com/u/st50maint)
#### Post date: [September 2, 2017, 10:32am UTC](https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309/2 "2017-09-02T10:32:39Z")

</div>

From the owners manual:

 

"Some may wish to biwire their speakers to the BHK. This practice involves using one shotgun

configured cable or two separate cables. In either case, connect one cable to one set of binding posts,

the other to the second set. On the loudspeaker side, one pair of cables goes to the tweeter binding

posts, the remaining set to the woofer section."

---

<div class="post-metadata">

### Author: ![dschamis](https://avatars.discourse-cdn.com/v4/letter/d/6a8cbe/32.png) [@dschamis](https://forum.psaudio.com/u/dschamis)
#### Post date: [September 2, 2017, 10:37am UTC](https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309/3 "2017-09-02T10:37:41Z")

</div>

Thanks

So does this mean that if you’re not going to bi-wire that you can pick either output?

---

<div class="post-metadata">

### Author: ![Elk](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/elk/32/1240_2.png) [@Elk](https://forum.psaudio.com/u/Elk)
#### Post date: [September 2, 2017, 10:48am UTC](https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309/4 "2017-09-02T10:48:04Z")

</div>

Yep!

---

<div class="post-metadata">

### Author: ![Paul](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/paul/32/6_2.png) [@Paul](https://forum.psaudio.com/u/Paul)
#### Post date: [September 3, 2017, 4:35am UTC](https://forum.psaudio.com/t/stupid-question-im-sure-why-do-the-bhk-300-have-2-speaker-outputs/4309/5 "2017-09-03T04:35:45Z")

</div>

Exactly.