# Suggestion: Jumpers with handle for BHK pre

**URL:** <https://forum.psaudio.com/t/suggestion-jumpers-with-handle-for-bhk-pre/10069>\
**Category:** Preamplifiers\
**Created:** [March 26, 2019, 7:10pm UTC](https://forum.psaudio.com/t/suggestion-jumpers-with-handle-for-bhk-pre/10069 "2019-03-26T19:10:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![brett66](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/brett66/32/92201_2.png) [@brett66](https://forum.psaudio.com/u/brett66)\
**Post date:** [March 26, 2019, 7:10pm UTC](https://forum.psaudio.com/t/suggestion-jumpers-with-handle-for-bhk-pre/10069/1 "2019-03-26T19:10:21Z")

</div>

> **[Lot (12) Micro Mini 2.54mm Standard Circuit Board Jumper Cap Shunts w/ Handle ...](https://www.ebay.com/itm/Lot-12-Micro-Mini-2-54mm-Standard-Circuit-Board-Jumper-Cap-Shunts-w-Handle/283096633114?hash=item41e9dfcf1a:g:04QAAOSw3mpXF~l5)**
>
> Lot of (12) Micro Mini Circuit Board Jumper Cap Shunts. Black 2.54mm with Tab Handle. | eBay!

Lost a jumper when changing voltage. Suggestion to PS Audio, these are so much easier to grab with hemostats or fingers.

---

<div class="post-metadata">

**Author:** ![Schroedster](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/schroedster/32/9718_2.png) [@Schroedster](https://forum.psaudio.com/u/Schroedster)\
**Post date:** [March 26, 2019, 8:07pm UTC](https://forum.psaudio.com/t/suggestion-jumpers-with-handle-for-bhk-pre/10069/2 "2019-03-26T20:07:50Z")

</div>

Great suggestion! I passed it over to engineering. The jumpers in there can be a bit of a pain, I’ll agree.

---

<div class="post-metadata">

**Author:** ![brett66](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/brett66/32/92201_2.png) [@brett66](https://forum.psaudio.com/u/brett66)\
**Post date:** [March 26, 2019, 8:41pm UTC](https://forum.psaudio.com/t/suggestion-jumpers-with-handle-for-bhk-pre/10069/3 "2019-03-26T20:41:19Z")

</div>

Thanks, I just came back to tag you. I changed to a new set of tubes as one of my current ones got noisy on me. I use hemostats as I can’t grab them without man handling the power board just behind…anyway, the hemostats snapped and the jumper flung into the ether.

Fortunately, I found one on an old retired PC that I should dispose of. I’ve only encountered these with the finger tabs a few times in all my years working with computers, but they sure are easier to handle and can’t cost much, if any, more.