# Upsampling my transport

**URL:** <https://forum.psaudio.com/t/upsampling-my-transport/29757>\
**Category:** DACs\
**Created:** [July 17, 2022, 1:16pm UTC](https://forum.psaudio.com/t/upsampling-my-transport/29757 "2022-07-17T13:16:37Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![toolbox149](https://avatars.discourse-cdn.com/v4/letter/t/e19adc/32.png) [@toolbox149](https://forum.psaudio.com/u/toolbox149)\
**Post date:** [July 17, 2022, 1:16pm UTC](https://forum.psaudio.com/t/upsampling-my-transport/29757/1 "2022-07-17T13:16:37Z")

</div>

I use a JaysAudio CDT2-MK3 into my Directstream. I just discovered my Jays transport has an Upsampling button on te remote. Thought I might give it a try, but I want to make sure Upsampling in the transport won’t cause any difficulties with the Directstream architecture.  
Anybody done this?

---

<div class="post-metadata">

**Author:** ![Elk](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/elk/32/1240_2.png) [@Elk](https://forum.psaudio.com/u/Elk)\
**Post date:** [July 17, 2022, 1:59pm UTC](https://forum.psaudio.com/t/upsampling-my-transport/29757/2 "2022-07-17T13:59:33Z")

</div>

This will not hurt anything. The DSD handles all incoming data the same.

Try it and see if you like the sound.

---

<div class="post-metadata">

**Author:** ![toolbox149](https://avatars.discourse-cdn.com/v4/letter/t/e19adc/32.png) [@toolbox149](https://forum.psaudio.com/u/toolbox149)\
**Post date:** [July 17, 2022, 3:29pm UTC](https://forum.psaudio.com/t/upsampling-my-transport/29757/3 "2022-07-17T15:29:15Z")

</div>

Thanks

---

<div class="post-metadata">

**Author:** ![maxim](https://avatars.discourse-cdn.com/v4/letter/m/ba9def/32.png) [@maxim](https://forum.psaudio.com/u/maxim)\
**Post date:** [July 17, 2022, 4:08pm UTC](https://forum.psaudio.com/t/upsampling-my-transport/29757/4 "2022-07-17T16:08:45Z")

</div>

No worries, it works fine.

From the SQ point of view, I prefer my Jay’s output unupsampled, but YMMV.