# Yang to my Focal Utopia's yin?

**URL:** <https://forum.psaudio.com/t/yang-to-my-focal-utopias-yin/9232>\
**Category:** Loudspeakers\
**Created:** [February 9, 2019, 7:24pm UTC](https://forum.psaudio.com/t/yang-to-my-focal-utopias-yin/9232 "2019-02-09T19:24:52Z")\
**Posts on this page:** 1\
**Showing post:** 51

<div class="post-metadata">

**Author:** ![cardri](https://sea1.discourse-cdn.com/flex015/user_avatar/forum.psaudio.com/cardri/32/2201_2.png) [@cardri](https://forum.psaudio.com/u/cardri)\
**Post date:** [February 23, 2019, 3:16am UTC](https://forum.psaudio.com/t/yang-to-my-focal-utopias-yin/9232/51 "2019-02-23T03:16:30Z")

</div>

OK, as you know me, I would be modeling the distance in VISIO, just my anal self… A meter should be fine to test the theory. I would next make sure you can do this by doing a search on RCA & XLR & DSD & simultaneous… when all else fails, read the manual… 🙂

 ![XLR%20RCA%20DSD](https://us1.discourse-cdn.com/flex015/uploads/psaudio/original/2X/e/e5b30b1f1b32b0b853dbe48efbf7cdff5050fe49.jpeg)

So the answer is you can use both; however, they will have a difference in level by as much as 6dB; however, the Woo Audio HP amplifier is accommodating with level (low/med/high). Understand, if you do this experiment, there will be an initial difference in volume you will have to adjust for…

Adding post about sub for completeness, thought I remembered…🙂 getting old sucks…  
Badbeef and Elk handled that inquiry…  
[RCA & XLR Output](https://forum.psaudio.com/t/add-subs-to-atc-active-speakers/4483)

---

_[View the full topic](https://forum.psaudio.com/t/yang-to-my-focal-utopias-yin/9232)._
