The PS Audio Regenerator 12 has a dial on its home screen that shows improvement on a scale from 1x to 100x. Typically they show around 10+x. Has anyone hooked up a PS Audio 12 to a PS Audio 12? I’d expect to see the improvement of 10x on the first unit & 1x on the second. If the second shows 10x that would lead me to believe that the meter could be just pasted onto the unit.
1 Like
Welcome to the forum! I’m not the expert but I’m pretty sure connecting a power plant to another power plant is frowned upon and not recommended. Maybe @jamesh or @Paul could chime in. I’d recommend keeping them plugged into the wall outlet and if you have two use separate circuits. That would be my 2 cents. Good luck!!
2 Likes
I wasn’t suggesting this as a long term plan. I just would have more confidence in the Improvement measure if it was different before & after another Powerplant.
1 Like
The measured incoming distortion is just that. I have found the P12 to be honest. At my current location the incoming distortion is 0.8 to 0.9 percent. When I had brought my P12 to a different location it read at either 8 or 9 percent. I will upload a current photo and a screen cap of a previous photo.
2 Likes
It’s definitely changeable, I normally have 0.1% out but on very rare occasions see 0.2%. When the regen boards of a P10 get past their best one can see all sorts of different values.
1 Like
Actually, it is not frowned upon because it definitely works. But, not many people do it because of the added expense.
2 Likes
I wish someone would do it and show the meters. Fun idea!
Welcome @dwcda Dave!
2 Likes
It would be a simple and fun thing for PSA to do at the factory. And that would likely generate some sales.
2 Likes
Wise, very wise. I’m sure Paul would be up for it.
1 Like
I tried connecting a P15 to a P20 last year when I had problems with the former (buzz from transformer). I don’t remember the exact THD IN values on the display but I perfectly remember a significant drop (it works as expected, obviously).
I did the experiment in agreement with the PSA staff to understand whether it was possible to reduce the noise in this way or not. It was fun.
3 Likes
I’ll pick up your P20 when it gets replaced by the power zone and we can try it out!
1 Like
The Gryphon power conditioner arrives at my home Wednesday.
6 Likes
If not too much trouble, I, for one, would enjoy some unboxing photos.
Enjoy.
2 Likes
Will do!!!
3 Likes
And when the Gryphon Power Conditioner arrives I WILL NOT use Stealth power cables with it. I have Gryphon Vanta power cables for it. Mmmmmmm.
2 Likes
*for now. 
4 Likes
Hard to find a winner here…
1 Like
The Gryphon Vanta cables are within 97% of the performance of the Stealth Cables. Sadly, they are way lower in cost. I have been keeping this a secret.
(Power cables only, I have no experience with Gryphon Vanta interconnects. But @1cdfoley does.)
Heresy!
1 Like