I’m curious about the noise my P12 injects into the line. The following are typical measurements as taken with an Alpha Labs Line EMI Meter: Wall 350 mV at 121 AC Volts P12 1900 mV 11…

Just me…just return it to your friend my .02 probably not believable.

From my experience those reading are believable and to be expected. I have the Alpha Labs EMI meter, non Chinese version, and I also found a major increase in EMI readings from the outlets of the P12. This is to be expected, as any amplifier is going to be producing EMI, and the P12 is an amp, am…

This question is easily answered. Ditch the meter and forget about what numbers it spewed. Plug all of your equipment into the wall and yank your Power Plant(s). Listen. Once you are comfortable with what you are hearing, plug everything into your Power Plant(s). Listen again. Does this as man…

I got the similar results with an EMI meter. The equipment is injecting EMI back into the line, like all powered equipment do. The Powerplant’s main goal is a clean, perfect sine wave. This produces a large portion of the sonic benefit you hear, but there’s still room for improvement outside of the…

Do properly shielded power cords and interconnects stop or minimize both Radio Frequency Interference (RFI) as well as Electro Magnetic Interference (EMI)? As for Electro Magnetic Interference that emanates from power supplies in large power amps, power plants, power stabilizers, transformers, etc.…

I have experienced the benefits of better power cables and interconnects (analogue and digital) first hand, but was not sure of the physics. I have also noticed that some manufacturers focus on insulation that prevents the cable from acting wrong, in terms of inductance, capacitance, resistance, et…

Thank you JeffofArabica for a no nonsense to the point understanding …is the power regenerator improving the listening experience or not…noise or otherwise… Try listening without the PS Audio regenerator the impact of unregenerated power the loss of sound and sounstage quality will show up in n…

Yes. The cable design affects EMI and RFI. Mind you, power cables also emit EMI. See The importance of power cable [/quote] Exactly…which is why I so much like my Pangea AC9SE MkIIs and my AC14SE MkIIs …they are very well shielded that when probed with voltage current detector …non is detected o…

Yep…the ears got it!! :shushing_face: :face_with_hand_over_mouth: just let’s not tell anybody or let the cat out of the bag… Now wheres my java…

Power Plant and Noise

Power Components

vee October 6, 2020, 6:38am 66

Yes. The cable design affects EMI and RFI. Mind you, power cables also emit EMI. See The importance of power cable

Topic		Replies	Views
Powerplant peak current and noise filtering Capability Power Components	23	2357	January 31, 2023
P3 or P12 for large amplifter Power Components	41	4112	July 12, 2019
Anyone experienced a regenerator making their equipment sound worse? Power Components	112	2833	August 29, 2023
Which Power Plant to Buy? Power Components	74	7111	March 16, 2018
From Stereophile.com 4/2/19 Power Components	32	2548	April 12, 2019

Power Plant and Noise

Related topics