Ive been toatally boned for over 6 weeks on this site… any suggestions re my issues?
Since my last post, they are worse now
NOW I REALLY NEED HELP
As an Engineer, I received an email from “someone” higher than the Klipsch customer service, noting basically they were no longer supporting me on these RP600M’s, which if you read my previous posts, they said the would honor them for life,in my next post I will SHOW YOU THEIR RESPONSE!
(they basiclly. said, " pound sand" i.e. "we are not going to guarentee your product anymore, mind you it’s been a year…
DONT BUY, they are supposidaly have a 5 yr warrenty,
Just to re-itterate, they DO sound good at 1/3 volume,
but I USED to play at full volume witch at best was 77 to 80 DBa ,
no where close to their 89,
but that aside,
These are a LOUD SPEAKER, Correct?
Like i said in my previous posts, these have been on 7 different amps… why do I still blow them at 1/3 vol, and / have amp shut down… not due to heat, i have made sure my amp is below 100 deg F
either the amp shuts down, do to the dip in impediance at 3.5 omhs, spiking the volts (no more than 25V)
But on a 100 watt amp continuous power should never set off the current draw protector on the ampl
noting these are rated at 100 , 400 W peak!!
So, again on 7 amps either the speakers blow or sound like an AM radio
Sorry, my computer seems to have some type of virus,
Who? meaning by name?
And what position do you hold?
I, like I said read your response,
I’m an Engineer, I’ve worked with every level of production.
warranty
customer satifisfaction
JD Powers
All the associated journalist, not only states like texas, (that was me as the guy on truck) but across the world with our vehicle.
I’m not sure what position you hold, As an Engineer, I’ve already supplied data after data, not to create blame by any means, but as I’ve said to the NICK. the other NICK, all the others…
Bottom line, if you are serious about not only your product, customer satificatication, and Social media.
I would suggest you call me personally…
Like I had to do many times, calling dealerships, and the customers themselves.
i’m not here to work against you… I’m here to help develop a future as I read in the history of Klipsch.
I have data on more than 7 amps … including
DBa, peak
Dba, ave
Resistance, (static, obviously not impediance)
current draw
voltage draw
speaker temp at cone outer
cabinet temp inside thru port.
Amp temp
Amp type
Even graphs on time/ vs temp performance.
I shared most of that with your team…
they didn’t care to analyis that.
Put things in comparison, if you know there was an engiineering problem in a vehicle you presently drive, and we were in conversation like we are now,
(not necessaryily , audio, but lets say auto cruise or auto lane change,
would you accept a response from me, similar to the one you provided to me under the same type of example?
OR WOULD YOU BE LOOKING FOR A LITTLE MORE?
again, I’m not here to fight… I’m looking forward to working together…
(simalar to the world problems of today that we face) … that an extreme of course,
my doors are always open to You and Your Engineering team to better the product…
like Sir Klipsch stated in his mission statement almost 100 years ago,
Sincearly,
Bill
Call me Sir… I’d love to discuss this tfurther.
Thank you
honesty, Ill do the engineering for them…
But it WILL be at their cost … i.e. meaning on taking me up on my offer coming here to determine root cause…
I’ve yet to post on amazon…
again, i wanted to help them,
now, what choice do i have left?
i see they are rated 4.5 stares …
I’ve read the comments on amazon,
those people, not offence, are buying … litterally a loud speaker for their home computer… and giving 5
i have to ask this audience, … i’m assuming its not for a computer