Paul mentioned in the P5 vs P10 thread that they were working on a ‘20’, which I presume would be a P20. Would be keen to hear more details, how many sockets, (UK especially), dimensions, power handling and any other details etc.

[image] Subwoofer Placement Guidelines Subwoofer Crawl Placement Guide: Get the best bass from your subwoofer with these placement guidelines. Find the best location for your sub here.

Understood; thanks for the response. Glad to hear you have been so successful in making the subs disappear. The REL’s really are impressive, aren’t they? Have fun.

Does anyone know if the trigger for the p20 can be set to delayed for trigger output?

Currently the P20 doesn’t support setting a delay on the trigger output. I’ve notified the team that you’re interested in it, though, so we’ll see about adding it when we redesign the online interface PowerPlay. Keep in mind, the P20 does allow you to set custom behavior for outlets when the P20 i…

I would like the P20 to keep all outlets on all the time, and allow the trigger input from another unit to active P20 trigger but with delayed trigger output from P20 to say BHK 300’s. This will allow the main ( preamp ) triggering unit to stabilize fully before the BHK amps are full on. Does this m…

I’m not sure I follow. If you have the BHK 300s on the P20 and you have the P20 outlets set to always on, then the trigger doesn’t matter - the P20 will always be passing power regardless of whether the P20 is in standby or not. Here’s my recommendation, hopefully I understand your goals. It soun…

Yes, it missed sorry. I want my preamp and amps to stay warm at all times. However, my preamp ( non PSA ) has tubes, and the time it comes out of standby is longer then the BHK 300’s. So I simply need to delay the 300’s trigger IF I use the preamp trigger to turn the 300’s on. Otherwise I have to us…

Ohh I follow you. Yeah, we would need the option to delay the trigger. We should be able to include that when PowerPlay goes live again this summer. Until then, though, I don’t think there’s a good way to work around it.

So this item could work as a trigger delay right? [image] Mini DC 12V Programmable Timer Relay Delay Module 24 Programs Infinite Cycle...

Or, should you feel like it, you can make a small Arduino project. You would need a relay, a 12v power source, an Arduino Uno, and an IR receiver, and some (very basic) programming skills. Fun to do it. Just did it myself, to overcome the lack of an out trigger on my Aesthetix Calypso pre. Cost me a…

New P20 ..... more details please?

Power Components

John_H April 30, 2020, 4:48am 385

Finally, last but not least, a third question regarding discrepancies in the P20s display data screen which has really bugged me, since the problem appears to a faulty “calculator” algorithm:

Topic		Replies	Views
P20--arrival and installation Power Components	253	6543	November 8, 2022
My New P20 Power Components	60	6252	April 12, 2021
The BEAST has landed - my new P20 Power Components	57	2189	December 29, 2020
P12 vs P20 Power Components	94	4362	April 14, 2022
P20 AC Power - value in the P20 over the P15? 20A power cord? Power Components	115	6098	April 11, 2020

New P20 ..... more details please?

Related topics