Bridge firmware updated and now it's messed up


#1

Hi guys and gals,



Wondering if you can help trouble shoot please?



I have a PWD with MK II upgrade and the bridge which is hard wired to the network router.



I am using 2.2.0 PWD firmware. Last week I noted the firmware update indicator for the bridge was green on the touch screen so I updated that and it was fine.



Then yesterday, that same indicator was green again so I did the bridge firmware update (it just says 2.14) once again and ever since (the last 24 hours) there has been a lot of errors with the bridge. It keeps dropping out of the network (yet all other devices on my network are fine) and I had to reset the bridge yesterday four times, just to get music playing but it is still happening.



Very frustrating and I do not understand what has happened!



Has this happened to anyone else?



How do I revert to the previous firmware?



Please help.



Thanks,



David


#2

Hi - have you gone to the bridge’s web page (accessed by typing in its IP address into your browser)? If so, what does it say there for your PWD FW and the Bridge FW? This is the place to start.


#3

I took the plunge to the latest Bridge FW (0.2.14b). I had the problem of art work showing up on the PWD but have it freeze on the one track and not change when a new track comes on. I went back to 0.2.13c. I might even go to PWD FW 2.2.0. In my system this combo has a smooth sound which appeals to me.


#4
Hi guys and gals,

Wondering if you can help trouble shoot please?

I have a PWD with MK II upgrade and the bridge which is hard wired to the network router.

I am using 2.2.0 PWD firmware. Last week I noted the firmware update indicator for the bridge was green on the touch screen so I updated that and it was fine.

Then yesterday, that same indicator was green again so I did the bridge firmware update (it just says 2.14) once again and ever since (the last 24 hours) there has been a lot of errors with the bridge. It keeps dropping out of the network (yet all other devices on my network are fine) and I had to reset the bridge yesterday four times, just to get music playing but it is still happening.

Very frustrating and I do not understand what has happened!

Has this happened to anyone else?

How do I revert to the previous firmware?

Please help.

Thanks,

David


Hi Dave... here is a link to 2.2.0.. http://www.psaudio.com/forum/#/discussion/4042/pwd-firmware-2.2.0 As stated above I like it with Bridge 0.2.13c which is around here somewhere!.
When doing up/downgrades it is important to give it time to do its thingI

I have made a lot of stuff ups along the learning curve but if you hang in there you will get the hange of it. + the experts on here are good value for a few tips and tricks to make life easier for us novices.

#5

http://www.psaudio.com/vanilla/categories/pwd-and-pwt-firmware-versions


#6
http://www.psaudio.com/vanilla/categories/pwd-and-pwt-firmware-versions


Trust G to dive in and rescue us. +++

#7

G’day. uhhh G’night. :smiley:


#8

G’day or should I say G’d Saturday afternoon!