P10 Zone problem


#1

Has anyone got problems with Zone C on their PP?

I have set it to Always on and the web GUI reports everything healthy (green), however both outlets are dead.

When moving the load from Zone C to Zone A, everything works.


#2

Sounds like you may have a dead relay or bad solenoid connection to it for zone c. Sounds like it may have to go back, unfortunately. Does the front panel show the outlet for zone c in the ‘green’ (i.e., turned on?) If so, there’s probably a hardware failure somewhere along the line.



Best of luck.



–SSW


#3
Sounds like you may have a dead relay or bad solenoid connection to it for zone c. Sounds like it may have to go back, unfortunately. Does the front panel show the outlet for zone c in the 'green' (i.e., turned on?) If so, there's probably a hardware failure somewhere along the line.

Best of luck.

--SSW


Thanks.
Yes, it is green and doesn't report any problems of any kind from what I can see.
If I don't need it I think I will wait a little with the return, still if it is a warranty issue.


#4

@frode



Let us know how it turns out for you. We just bought 2 P10s; one for the stereo and another for the Home Theater system.



Good luck.



Bob