I received my two P20s (in black) about a month ago, and I’m extremely happy about their performance. However, there are some hardware and software implementations which can be tweaked for better performance - whether UI or otherwise - as a process of continual improvement. Please feel free to pit…

Please bring back the large, easy-to-read, display of data! And not default to the quad-analog-VU meter page, by allowing other pages to be “sticky”.

Request: Please eliminate the disparity in specifications by clarifying which of the following is correct (for the international 230V model): *silkscreened on the back panel of the P20: 230V~ 50-60Hz 10A (2300VA) Max 45W Idle *from the website and the User’s Manual: 230V 20A 50/60Hz 2000 VA …

Hi John_H, Thanks for letting us know about this. You are correct that the manual is in error. The standby power consumption is actually 45 watts. As well it should say 8.7 Amp, not 20 Amp. We’ll get those fixed right away. To some extent, both are right though: 10A (2300VA) Max is the input …

Dear Jeremy, Thanks for your reply, and for (presumably) clarifying and amending the discrepancies on both the User’s Manual and your website. John

Request: please build in a grounding post onto the chassis of the P20 In the spirit of “star grounding” being the most effective and practical way to normalize potential between various components, it would seem that the P20 is the most logical place to place a grounding post (as the macro source …

Something like this? [DSC01611] Every system componet I have has a signal ground, except for the power plant.

Yes, assuming that it’s beneficial to have a star grounding arrangement for all of the components plugged into the PowerPlant, for it to have a grounding post (or two) similar to the one on your photo !

Request: how does one use a voltmeter to fine-tune the P20’s voltage settings and readings? It’s not covered by the Owner’s Instruction booklet! Pushing the upper right corner of the firmware screen will display the calibration screen, with three parameters each having a minus (-) and plus (+) adj…

In the screenshot example above, what does one need to do with the touchscreen panel adjustments to calibrate for the following? Actual figures as measured by a reliable voltmeter input voltage: 227.0V P20’s output voltage: 234.0V Assuming desired output voltage of 231.0V, the input voltage di…

The I/O calibration process is covered in the service manual…I’m very surprised the V output indication has drifted by 3V since factory calibration.

Wish List for P20 owners

Power Components

Brodric November 21, 2018, 5:30am 22

Something like this?

Every system componet I have has a signal ground, except for the power plant.

P20 calibration question

Topic		Replies	Views
My New P20 Power Components	60	6252	April 12, 2021
P20--arrival and installation Power Components	253	6543	November 8, 2022
Can the P20 meters be calibrated? Power Components	61	938	April 26, 2023
P20 freezing up again? Power Components	175	6766	March 27, 2019
New P20 ..... more details please? Power Components	386	25748	May 7, 2020

Wish List for P20 owners

Related topics