Air-Lens I2S HDMI Connections

[wanders]

I have a Soekris dam 1941 (DAC) that I built (assembled) about four years ago. I’m thinking about purchasing a PSA Air-Lens. Before proceeding with the purchase, I must be sure that the I2S connection can be achieved.The Soekris has an available I2S input port that I have yet to activate. Setting up the Soekris with an active I2S/HDMI input connector is not an issue, but I must know the pin-out configuration of the Air-Lens HDMI output to configure the connector. Apparently PSA is breaking some new ground here, so there is not a “standard” configuration. I’ve seen this issue raised a few times, but I don’t see any answers. Help would be appreciated.

Thanks

[markus46]

Welcome Wanders,

Take a look at this

Looking for HDMI-I2S pin-out diagram

Looking to fabricate a HDMI cable to carry audio I2S signals from a PS Audio transport to a Holo May DAC. What is the correct 19 pin HDMI pinout diagram? Is this one correct? |1| GND — Ground (Common ground for signal integrity)| |2| LRCK (Word Clock) — Left/Right Clock (Word Clock, syncs audio)| |3| GND — Ground (Common ground)| |4| SCL — I2C Clock (optional for device control)| |5| SDA — I2C Data (optional for device control)| |6| GND — Ground (Common ground)| |7| SD (Serial Data) — I2S…

and this

Direct Stream Memory Player HDMI pinout

For the Direct Stream Memory Player, I am specifically looking to find the + and - states of HDMI pins: 1 and 3 (DATA); 4 and 6 (BCK); 7 and 9 (L/RCLK). Thanks

Cheers
M

[wanders]

Great, Thx

[tmcqueen]

[McRican]

A little more challenging to get LPs to play through the AirLens.